
Not spiked. Incorporated.
A hair control that runs through your entire workflow — from the first wash to the final result.
Your instrument is under control. Is your method?
Hair is a hard matrix, and the most demanding part of the analysis happens before the instrument ever sees the sample. Washing, weighing, digestion, extraction: this is where hair toxicology results are won or lost.
A control that carries the analyte on its surface can confirm that your instrument is reading correctly. It cannot tell you whether your extraction released what was actually locked inside the keratin.
Inside the keratin, not on top of it
TricoCheck® Controls are manufactured from authentic human hair from selected donors. Through Comedical’s incorporation process, target analytes are held within the keratin matrix — the same place they sit in a real specimen.
The difference is one you can observe in your own laboratory. Put a TricoCheck® control through your standard decontamination protocol: the wash solution comes back negative. Nothing rinses off, because nothing was sitting on the surface.
Wash it. Extract it. Test it. Just like a routine specimen.
One control, the whole process
Because the analytes are incorporated, TricoCheck® enters your workflow at the very first step instead of the last one. One control covers the entire chain:
- Decontamination — that your wash protocol removes contamination without stripping the analyte;
- Weighing — that your sample intake is consistent;
- Digestion / Extraction — that your method actually releases analytes from the matrix;
- Clean-up — that recovery holds through sample preparation;
- LC-MS/MS · GC-MS/MS — that the instrument quantifies correctly.
Cut into ≃ 2 mm segments and ready to use, with values assigned by code and lot inside every pack. Custom controls available on request from Comedical’s R&D laboratory.
Tricocheck® Controls Products
Request an evaluation sample
The fastest way to see the difference is to run TricoCheck® against your own extraction protocol.



